User Manual for David30 GNSS Receiver v2.0
95
normally.
If the serial port baud rate is successfully self-adaptive, a message box pops
up indicating successful self-adaptive matching, meanwhile, self-adaptive
triggering enabling stops automatically. If the serial port baud rate is not
successfully self-adaptive, this function is always operating.
Figure 6.23 Serial baud rate self-adaption
OLED sleep mode
Only if the “Function” is switched to “On” can the OLED display enter the sleep
mode. Sleep time has the following levels: 1min, 5min, 10min, 15min, 20min,
25min, and 30min.
Note: After the OLED display enters sleep, it can be waken up through button
and pop-up message.
Interference detection
Figure 6.29 OLED sleep mode