TERRY 1100W TSL1, Original Instructions Manual

Page: 7 / 16

CONTROLS
Location
• Lower level control switch(standard installation)-mounted on
control post.
Or
• Lower level control switch (pit installation / side entry)
mounted on the building structure at the lower level.
• Platform control switch-mounted on lift the car control panel.
• Upper level control switch (no upper level gate) mounted on
the building structure at the upper level.
Or
• Upper level control switch (upper level gate) integral with the
gate frame.
Function
• All controls are of the “hold to run” type. Maintain pressure on
the switch until the lift reaches the upper or lower level. Press
one side of the switch to go up, press the other side of the
switch to go down.
• A key switch is located on the car control panel to isolate the
lift.
• An emergency stop button is located on the car control panel
to stop the lift in the case of an emergency.
• If the lift has been supplied with a remote control lift enabler
unit the lift will remain disabled until key fob is pressed.
Pressing the key fob will allow the lift to be operated by the
up/down control in the normal way. 3 minutes after pressing
the key fob the lift will automatically revert back to its disabled
mode preventing further use. The lift can then only be
reactivated for use by repressing the key fob.
7