background image

14

DECLARATION OF CONFORMITY

Lift Type: 1100W TSL1

This lift was manufactured by TERRY GROUP Ltd., who declare 
that this lift fulfils all the relevant provisions of the following 
Directives:

2004/108/EEC

EMC Specifications

2006/42/EC

Machinery Directive

This lift also fulfils all the relevant provisions of the following 
Standards:

BSEN 12015:2004

Electromagnetic Compatibility. Product family 
standard lifts, escalators and moving walks. 
Emission.

BSEN 12016:2004
+A1:2008

Electromagnetic Compatibility. Product family 
standard lifts, escalators and moving walks. 
Immunity.

BS6440:2011

Powered lifting platforms for use by disabled persons

Person authorised to compile Technical File:
Greg Gnyp, Terry Group Ltd., Longridge Trading Estate, 
Knutsford, Cheshire, WA16 8PR

This declaration was completed at Terry Group Ltd., Longridge 
Trading Estate, Knutsford, Cheshire, WA16 8PR, in September 
2011.

This compliance is only valid if the installation test Certificate 
has been completed and signed by a competent lift engineer 
which confirms that it has been installed to the latest installation 
instructions.

TERRY GROUP Ltd.

P.Morrey (Managing Director)

Summary of Contents for 1100W TSL1

















Reviews: