9
EMERGENCY PROCEDURES
a) Isolation of the lift is achieved by switching the key switch on the car
control panel or by switching off the isolator switch on the charger pack
located indoors.
b) In the unlikely event that the lift stops part-way through its travel and
will not restart, it can be lowered manually. First push the stop switch
down (1) then remove one posi-drive screw from the cover plate below
the car control panel and rotate the cover (2). Then push the lever to
the left (3) to lower the lift.
Please Note: If the platform is at the upper level and will not lower
follow emergency procedure above.
Be aware that the platform safety device does not function when
manually lowering the lift. Ensure that people are away from the
platform and that there are no obstructions.
c) The Isolator switch on the charger pack located indoors, should be
switched on at all times.
NOTE: A competent person will need to be called to restore the safety
functions of the lift before re-use.
1
2
3
Summary of Contents for 1100W TSL1
Page 1: ...1100W TSL1 Platform Lift Original instructions...
Page 2: ......
