background image

 

         

Disposal

 

Drill contains NICKEL-CADMIUM battery. Battery must be disposed of or recycled properly. 
Check with local government for proper disposal. 
Power tools, accessories and packaging should be sorted for environmentally-friendly recycling. 
Only for EC countries:
 
            Do not dispose of power tools into household waste! 
 

Do not dispose of battery packs/batteries into household waste, water or fire. Battery packs/batteries must be 
collected, recycled or disposed of in an environmentally-friendly way. 
Only for EC countries: 
Defective or dead batteries must be recycled according to the directive 2006/66/EC.

Maintenance 

Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, or other volatile solvents for 
cleaning. 

Accessories 

CAUTION: Use only accessories or attachments recommended for use with your Terratek tool specified in this 
manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use 
accessory or attachment for its stated purpose.

According to the European Directive 2002/96/EC on waste electrical and electronic equipment and its 
incorporation into national right, products that are no longer suitable for use must be separately collected and 
sent for recovery in an environmentally-friendly manner.

Li-Ion

Li-Ion

Summary of Contents for TLICS01















Reviews: