Terratek TLICS01, User Manual

Page: 10 / 14

Symbols
IMPORTANT: Some of the following symbols may be used on your tool.
V……………………… volts
A……………………… amperes
Hz…………………… hertz
~……………………… alternating current
…/m………………… revolutions per minute
.. ………………… class II construction (double insulated)
Kg…………………… kilograms
No…………………… No load speed
……………………… Conforms to European safety standards
DC ………………… Direct Current
Specific Safety Rules
1) Hold power tools by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring.
Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
2) Wear ear protection. Exposure to noise can cause hearing loss.
3) Be aware that this tool is always in an operating condition, since it does not have to be plugged into an
electrical outlet.
4) If the bit becomes jammed, immediately turn the trigger switch off to prevent an overload which can
damage the battery pack or motor. Use reverse to loosen jammed bits.
5) Do NOT operate the Forward/Reverse lever when the trigger switch is on. The battery will discharge rapidly
and damage to the unit may occur.
6) When storing or carrying the tool, set the Forward/Reverse lever to the center position (switch lock).
7) Do not strain the tool by holding the speed control trigger halfway so that the motor stops.
8) Be careful not to get dust inside the chuck.
9) Do not touch the rotating parts to avoid injury.
10) Do not use the tool continuously for a long period of time. Stop using the tool from time to time to avoid
overheating of the motor.
11) Do not drop the tool.
Unpacking
Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing l
ist are included.
Package contents
A) Screwdriver
B) Charger
C) User manual
……… … …… …… … … …… … … … … … … … … … … … …… … … …
Functional Description
(Fig. 1)
WARNING: Disconnect the plug from the power source before making any assembly, adjustments
or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.