www.terrateck.com
23
REAR WHEEL
(7) Fit the rear wheel tubes into the tubes at the back of the machine. The wheels must be positioned towards the outside of the
machine.
(8) Tighten the two screws and nuts on each side using the
13mm spanner
.
(9) Connect the central bar to the left and right arms of the push bar.
(10) Assemble the two pairs of bolts, on the left and right, with a pair of 13mm open-ended spanners.
(11) Fasten the harvest bag tubes to the arms of the push bar with a
4mm Allen key
.
ASSEMBLY INSTRUCTIONS
PUSH BAR
(12) Thread the assembly into the holes in the frame and put the bolts through the holes, when they are aligned.
(13) Tighten the bolts using the
13mm open-ended spanner
.
