www.terrateck.com
26
RÉCOLTEUSE DE JEUNES POUSSES 800MM
800MM BABYLEAF HARVESTER
T000193
(27) Check that the control cord passes under the right half-handle so that it
can properly activate the trigger of the combi-drill.
(28) Check that the cord is taut. If necessary, tighten or loosen the side bolts.
Cut the protruding end with a saw to avoid any injury when moving around
the harvester.
(22) Adjust the drill's rotation settings
. See Managing the operating settings.
(23) Fit the drill onto the arm of the machine by pushing the chuck onto the hexagonal shaft.
(24) Tighten the chuck of the drill.
(25) Adjust the positioning of the part that controls the trigger of the drill and tighten the drill using the plastic toggle latch.
(26) Check that the control lever is placed in front of the trigger of the drill; if necessary, adjust the height of the control mechanism
to fit the drill.
Trigger of the combi-drill
Control lever
