TerraTValue
31
NOTE!
The option Video Standard makes it possible for you to choose different television standards.
This only makes sense, for example, if you have an NTSC VCR or camera connected to the TV
card. Then you can choose the setting NTSC under the option Video Standard, so that the
delivered signals can be processed correctly. Make sure that a change in the setting from PAL
B,D,G,H,I only occurs under the conditions mentioned. Otherwise the TV signal reception will
be limited.
The Menu Point "Video Format"
Through the menu point Video Format you can determine the size of the picture to be recorded
and the number of bytes that are to be used per pixel.
fig. 12:
In this window, determine the size and number of bytes used for recording.
The setting Image Dimensions
Through the point
Image Dimensions
you can choose from three resolutions for the capturing
of frames and recording of video sequences:
Resolution
Result
Single Frame
Result Video Sequence
192 x 144
OK
OK
384 x 288
OK
Depending on your system/hard drive capability, it is
possible that dropped frames can occur. For more
information, please read the topic
Attention! – Recording
Parameters of Video Sequences
in this online manual.
768 x 576
OK
Using this resolution always results in dropped frames.
This is because the incoming amounts of data of around 17
MBytes are more than any hard drive currently available
can process.
