16
TerraTValue
Connecting an External Device with Video-Out
External devices that have a Video-Out port can be connected to the Video-In port of
TerraTValue using a cinch/cinch cable (see the following illustration).
fig. 4:
Use this cable to connect a device with a Video-Out port.
Proceed with the cable connection as follows:
1.
Plug in the cinch cable with one end in the video out of the external device and the
other end in the video in of the TV card.
2.
Under the menu point
Options\Video Source
in the TV software choose the setting
Composite
, so that the video picture of the external device will be shown. You can
also set the video source
Composite
, by clicking on the
V
-interface which is shown
on the left side of the symbol bar in the TV software.
NOTE!
When attaching a cinch cable, please read the segment
Attention! - Connecting Audio to the
TV Card
at the end of this topic.
