manualshive.com logo in svg

TerraTec SiXPack 5.1+, Manual

Share
Download
TerraTec SiXPack 5.1+ Manual Download Page 80

80

SoundSystem SiXPack 5.1 +

A keyboard connected to the sound card does not react when I hit a key.

·

 

First, make sure that the driver for communicating with the keyboard has been in-
stalled. The driver for this card is called 'SiXPack 5.1+ External MIDI' and should be
found in the Windows Control Panel under System, then Device Manager. If it is not
there, reinstall the current drivers.

·

 

If the driver is installed, it must be selected as the MIDI input device in the respective
sequencer software. Please see your sequencer manual for details on this. Most se-
quencer programs have a menu item labeled "Setup/MIDI Devices", where you can
select MIDI input and MIDI output devices.

·

 

If both these conditions are satisfied and the problem persists, in other words the
software does not react when you hit a key or no sound is audible, the MIDI connecting
cable is almost certainly the cause of the trouble. Experience has shown that there's an
enormous number of different MIDI connector cables which unfortunately are all iden-
tical in appearance. These cables should contain a so-called optocoupler suitable for
the sound card's levels. As it's not possible to check this from the outside, always use
the sound card manufacturer's MIDI cable. As a result of this problem, our product
range includes such a cable which you can obtain from your equipment retailer.

Where can I get new drivers and utilities for my sound card?

You can always obtain current drivers and software versions from the ReActor BBS at +49
2157-817924 (analog) and +49 2157-817942 (ISDN). You also have access to them through
our Internet sites (http://www.terratec.net). Here, you can obtain current information
about our products and hot new tools for your sound card.

The force feedback of a ForceFeedback joystick connected the SiXPack 5.1+ does not work.

The MIDI lines for ForceFeedback transmission are usually used for another purpose. En-
sure that the SiXPack 5.1+ Game Device interface is given its own IRQ and always use the
most up-to-date software for your ForceFeedback joystick.

Summary of Contents for SiXPack 5.1+

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands