manualshive.com logo in svg

TerraTec SiXPack 5.1+, Manual

Share
Download
TerraTec SiXPack 5.1+ Manual Download Page 28

28

SoundSystem SiXPack 5.1 +

Uninstalling the driver under Windows 2000

If you want to remove the driver from the system, it is best to do this 

before

 you remove the

card using the setup program that you also used when installing the driver.

Start 

AUTORUN.EXE

 in the root directory of the SiXPack CD and choose the menu point "Install

driver".

This will start the setup program.

Choose "Uninstall SiXPack 5.1 + driver".

Select "Shut Down".

Then you can remove the card when the PC is turned off or completely reinstall the driver if this
were necessary.

The accompanying bundle software can be removed as simply as well. Call up "Add/Remove
Programs" in the Windows Control Panel and locate the programs that are to be deleted. Select
them one after the other and each time click "Add/Remove...".

Driver installed – this is what it looks like.

After the driver has been successfully installed, you should verify that everything is functioning
properly with your Windows 2000 system. In the Device Manager you can check the status of
recognized or installed hardware components. The Device Manager is found in the Windows
Control Panel under "System" > "Hardware". Then click on the "Device Manager..." button.

Summary of Contents for SiXPack 5.1+

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands