manualshive.com logo in svg

TerraTec SiXPack 5.1+, Manual

Share
Download
TerraTec SiXPack 5.1+ Manual Download Page 65

SoundSystem SiXPack 5.1 +

65

Sliders

Move to a specific time in the title.

Increase or decrease the brightness of the video output.

Increase or decrease audio output.

Color Control Bar 1. Adjust the relative strength (balance) be-
tween video colors blue and yellow.

Smooth rewind and smooth fast forward.

Color Control Bar 2. Adjust the relative strength (balance) be-
tween video colors red and green.

Adjust the volume.

Counter

The counter shows the chapter currently being played, and how
much time has elapsed since the Title began playing.

Mute

Mute if it is checked.

Directional Arrows

Use the directional buttons just as you would the mouse button or Tab key.

The arrows represent (clockwise from top): Navigate up, Navigate right, Navigate
down, Navigate left. Center: Select or Enter.

Numeric Keypad

The numeric keypad provides you with a method of selecting numbers. This is
more likely to be used while playing a Video CD than a DVD disc. Any time that
you enter a numeric value, click the corresponding key on the numeric keypad
and then click the checkmark to accept that number.

Summary of Contents for SiXPack 5.1+

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands