manualshive.com logo in svg

TerraTec SiXPack 5.1+, Manual

Share
Download
TerraTec SiXPack 5.1+ Manual Download Page 71

SoundSystem SiXPack 5.1 +

71

Keep in mind: In order to use the M3PO go comfortably and easily navigate through your MP3
CD's, before you burn a CD you should take a second look at the functionality of the EDA sys-
tem (Chapter “

Fehler! Verweisquelle konnte nicht gefunden werden.

” on page 

Fehler!

Textmarke nicht definiert.

). Dedicated burner software is also recommended, as Musicmatch

Jukebox doesn't offer any option to create folders.

Not just for hunters, for collectors too

Organize your music archive and sort according to a wide range of categories, including album,
artists, title, genre or mood. If you want you can add your own. The “Find Music” function en-
ables you to find your favorites quickly and easily (CTRL+F).

Always the same, yet different.

Another feature of this software is its option of providing the interface with a new skin – they
like to use the word skins. In the VIEW menu under VISUALISATIONS and SELECT
VISUALISATION you can switch between installed skins.

If you want to download other skins or find out more information, we recommend the Mu-
sicMatch homepage. The address (it couldn't be simpler): http://www.musicmatch.com.

Summary of Contents for SiXPack 5.1+

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands