TerraTec PHASE 26 USB, Manual

Page: 35 / 48

The PHASE ControlPanel (with Windows operating sys-
tems).
The PHASE ControlPanel is - beside the drivers - by far the most important piece of
software in the package. Here, depending on the requirements of each situation, you can
have total control of the audio interface, reduce volumes (take this literally!), control the
direct monitoring and carry out firmware updates.
The following are the individual function blocks, page for page, from left to right:
OUTPUT
Use this to adjust the output volumes of the individual output channels of the
PHASE 26 USB System. The individual sliders here make direct adjustments to the
hardware and correspond with the speaker settings of the Windows mixer. There are
separate sliders for each mono channel. If you like, you can link these to the switchable
stereo-link function. A mute button is provided to mute playback.
The Output page of the PHASE 26 USB ControlPanel
Practical tip: If you are working with common audio/MIDI se-
quencers, you should also use this software for volume control.
The advantage is that the settings are usually saved together with
your project (song, arrangement etc.).
PHASE 26 USB (English) 35