34
C.A.R. 4000 (English)
If you want to switch a character between upper and lower-case, use the MENU button, which
also has
a
ßà
A
below it. If you want to delete a character, press the soft key, i.e. the
button on the remote control and then the OK button.
Volume control.
As mentioned briefly above, the remote control can be used to regulate the volume. However,
you can also change the volume on the device with “Volume” in the main menu using the
selection wheel. When you regulate the volume on the C.A.R. 4000, this only attenuates the
signal. If a value of 100 is shown on the display, the signal is no longer attenuated and 0 dB is
sent at the output with the material fully controlled.
Headphone volume.
To set the headphone volume select
Settings
in the main menu and then
C.A.R.
and there
Headphone Volume.
. As you can see, this is a percentage figure—it describes
the proportion of the headphone volume in the total sound level. So when you regulate the
volume with the remote control the headphone output is also regulated correspondingly. The
related amplifier has an output of 60 milliwatts.
