Terra NASBOX 5 G2 User Manual Download Page 77

Page: 77 / 157

To join an AD domain, you can refer to

the figure here and use the example

below to configure the TERRA

NASBOX 5 G2 for associated filed

input:

AD Domain Example
Item

Information

Work Group / Domain
Name

domain

ADS Support

Enable

ADS Server Name

Computer1

ADS Realm

Domain.local

Administrator ID

Administrator

Administrator
Password

***********

Local User Configuration

From the

Accounts

menu, choose the

User

item, and the

Local User

Configuration

screen appears. This screen allows you to

Add

Edit

, and

Remove

local users.

NOTE

• The DNS server specified in the WAN/LAN1 configuration page should be

able to correctly resolve the ADS server name.

• The time zone setting between TERRA IP storage and ADS should be

identical.

• The system time difference between TERRA IP storage and ADS should

be less than five minutes.

• The Administrator Password field is for the password of ADS (Active

Directory Server) not TERRA IP storage.

Summary of Contents for NASBOX 5 G2






























































































































































Search results

Summary of Contents for NASBOX 5 G2

Reviews:

Terra NASBOX 5 G2, User Manual, Page: 77 / 157

Search results

Summary of Contents for NASBOX 5 G2

Reviews: