Terra NASBOX 5 G2 User Manual Download

Page: 34 / 157

Wake-Up On LAN (WOL)

The TERRA NASBOX 5 G2 has the ability to be awoken from sleep mode via

WAN/LAN1 or LAN2 port.

From the menu, choose the

WOL

item, and the

Wake-up On LAN

screen appears.

From here, you can

Enable

Disable

Wake-up On LAN Configuration

Item

Description

WAN/LAN1

Enable

Disable

WOL service from WAN/LAN1

LAN2

Enable

Disable

WOL service from LAN2

Apply

Click

Apply

to save changes.

SNMP Support

From the menu, choose the

SNMP

item and the

SNMP Support

screen appears.

You could enable the SNMP function and filled in the related information in each

NOTE

The system must be rebooted before TERRA IP storage can function
normally after file system check completes.

Summary of Contents for NASBOX 5 G2






























































































































































Search results

Summary of Contents for NASBOX 5 G2

Reviews:

Related manuals for NASBOX 5 G2

Brands by name

Popular brands

Terra NASBOX 5 G2, User Manual

Search results

Summary of Contents for NASBOX 5 G2

Reviews:

Related manuals for NASBOX 5 G2

Brands by name

Popular brands