IDM-Mainmenue 30/07/02 11:02
Heat circ A:
Heat circ B:
Heatpump: on
[1]
32°C,
next
outd-
temp:
19
°C
20,7°C
21,2°C
Buffertemp.:
52°C
C
ontact extern closed
clock
3. The Display in the Main menu
Page 3
for each heat circuit. If no space temperature
sensor is attached or no space influence
defined, 0,0°C is indicated here..
Announcement of the current heat pump status (in/out),
the heat pump stage ([1] and ev. [2]), and of the
.
“Tab” is shown if buffer is loading for domestic water
Indicate to the buffer temperature (feeler 6), if an
appropriate feeler is attached.
Error messages appear in the grey deposited field in the
display. Closer description see page 24.
If a heating circle runs in the cooling-mode, appears
here "cool"
Heatpump temperature
Sunshade is displayed in Summer-mode
Shows the actual outside temperature
Shows the Day and Time
Shows the heating circuit operation mode:
Heating Circuit Operation with Nominaltemp.
Heating Circuit Operation with temperature saving
Pump in operation
Heat Circuit Operation in Heating program
21,7°C Shows the measured room temperaturewith
attached ambient temperature feeler
Announcement "contact externally closed", if this
contact is used and is closed. With open telephone
contact the field is empty. To use of the contact see
description of function.
Note: If the regulation is not served longer than 1 mi-
nute in a submenu , the announcement jumps again
in the main menue (excluded with announcement of
the temperatures)
Explanation of the indication symbols:
Turnkey D1 press confirms inputs
Turnkey D1 turn around the cursor
t o
p l a c e
a n d / o r
t o
c h a n g e
attitudes
Applies also to Turnkey D2!
D1
D1
