Page 16
16. Loading buffer once
D1
D2
bufferloading
Actual buffer temperature:
47°C
Loading buffer once:
off
back
Desired tap water temp.: 48°C
F1
F2
F3
F4
F5
F6
1.
D2
2.
3.
4.
5.
Loding buffer once
F5
D2
D2
off
D2
D2
back
D2
In the “bufferloading” window the actual and the desired
temperature in the upper buffer are shown.
Note: The buffer loading once can just get activated if
there is a heat pump connected.
The loading just starts if the actual temperature is below
46°C and the desired temperature. It stays activated
until the actual temperature is 10°C above the set
temperature, reaches 55°C or the heatpump is switched
off by the max. temperature of the heatpump.
D1
D2
IDM-Mainmenu 30/07/00 11:02 clock
Heat circ A:
Heat circ B:
Heatpump: on
[1]
32°C,
outd-
temp:
19
°C
20,7°C
21,2°C
next
F1
F2
F3
F4
F5
F6
