Page 9
9. Set the operation mode of the Heating Circuits
D2
D2
D2
1.
2.
D2
3.
4.
5.
Heat circ A / B:
function
D2
D2
function
always high level
D2
D2
D2
back
Heating program:
- Always high level:
- Always low level:
- Constant temp:
- Off:
- cooling:
The Heating for Heat circuit A operate by the set Heat
timing
The Radiators for Heat circuit A operate always with
nominal Temperature without a drop.
The Radiators for Heat circuit A always operate with
saving temperature.
The heating keeps a constant temperature that is set
in the next line. Summer-Winter switching and the
heating times have no effect
Heat circuit A is switched off. Except for Antifreeze
function.
The heating circuit A runs in cooling operation. The
temperature must be set for heat circuit A. The
Mainmenu shows cooling and the pump for heat
circuit A.
Note:
In the case of use of the external contact the
mode of operation of the heating circles, depending
upon attitude in the specialist level, can depend on the
switching status of the external contact, sees in addition
the description of function.
D1
D2
Heat.circ. A
settings heating program
non freezing:
on
function:
heating program
constant at: 35°C
back
next
D1
D2
IDM-Mainmenu 30/07/00 11:02 clock
Heat circ A:
Heat circ B:
Heatpump: on
[1]
32°C,
outd-
temp:
19
°C
20,7°C
21,2°C
next
