EN
18
Allowable Configuration
You are allowed to install and use a child seat provided the
following standards are adhered to:
Your seat and setup are compliant with EN 14344 (European
Standard for Child’s Seats for Bicycles)
The seat must be designed so that any contact between the
child’s feet and the Wheel or Spokes are impossible.
The distance from the center of the Wheel and the seat’s
center of gravity (as indicated by the center of gravity mark
on the child’s seat) should not be less than 90 mm and not
more than 100 mm. This will avoid the bike and Front Wheel
from swinging upwards.
The child’s fingers must be protected against being caught in
any part of the Saddle, such as the springs of Suspension
Saddles.
You must use an approved carrier, such as the Tern Cargo Rack
which is EN 14872 approved and can safely carry up to 25 kg.
(For example, if the child seat weighs 5 kg, your child should
weigh no more than 20 kg.)
10. Luggage and Children Transport
The entire load capacity on a Tern bike includes the rider’s weight, other accessories, approved rear rack, child seat and the child’s weight.
Please check the CE frame sticker on the bike frame for the maximum weight limit.
The child seat should NOT be mounted or attached to the Seatpost.