8
On the other side there are two Clamp Outlets, which can be used as an electrical socket.
The total electric power of connected consumers can reach not less than 50W.
The Firebox Door (2) rotates on a hinge, opens to 140 ° and has a cavity with an installed seal. The Locking
mechanism securely locks the door in closed position by turning the Handle (3). The door there has a glass
window to allow a visual monitoring of combustion.
Ash and combustion remains fall through the slits of the grate into the Ash Drawer (4). This drawer can also
be used to clean the stove without interrupting the burning. Also, it is used to effectively regulate the
intensity of burning due to the built-in Small Gate (5), which serves to feed air into the combustion chamber.
The control unit is separated from the ash drawer and other hot parts with heat-resistant mineral wool, such
as “Rock wool wired mat-80” with a coating of aluminum foil (may be used a different brand with similar
properties). The upper surface of the stove is used as a Cooking Surface (1).
Caution
!
The cooking surface is heated to high temperatures
The outer surface of the stove is covered with a heat-resistant silicone enamel type KO-868 with a maximum
burnout temperature of 1100°F (600°C).
Company produces another model “INDIGIRKA-2 Handle” in this model line, which is designed with
handles at the upper part of the stoves. Handles are intended for carrying purposes and for protection of
expensive thermoelectric generators from the occasional strokes and falls.
CLEARANCES
The minimum clearances to combustible materials can be decreased by installing fire-proof shields between
the floor or walls and the stove. Those shields must be installed permanently, if you plan to use the
installation site periodically.
Fire-proof shield recommendations: ceramic tiles 1" (25 mm) thick, or an equivalent non-combustible
material, on fire-proof supports, or a metal sheet of minimum 0.06" (1.5 mm) on fire-proof supports.
When installing the stove in a temporarily room, cabin, premises, construction areas, the installation site
should be protected from fire.
Floor:
Before and under the firebox door it is strictly recommended to install a minimum 0.06" (1.5 mm) metal
sheet of dimensions 20" x 27" (500 mm x 700 mm) on fire-proof supports, long side along the stove.
Combustible material’s floor under the stove must be protected from fire with a metal sheet on fire-proof
supports, and the clearance from the stove’s bottom to the floor should be not less than 4” (100 mm).
The minimum clearance from the floor to ash drawer’s bottom should be:
a) clearance from combustible or semi-combustible floor to the ash drawer’s bottom –not less than 5.5” (140
mm).
b) clearance from non-combustible floor to the ash drawer’s bottom – at the floor level
