3
IMPORTANT SAFEGUARDS
DANGER
:
Failure to mind the dangers, follow warnings and cautions in this manual may result in
serious bodily injury or death, or in a fire or an explosion causing damage to property.
This stove is primarily for outdoor use. Do not use the stove for permanent indoor heating or cooking.
Do not use the stove in rooms intended for sleeping or permanent residence.
Do not use in or on boats or recreational vehicles.
Do not use on wooden decks, wooden furniture or other combustible surfaces.
Do not use in an explosive atmosphere.
Do not store or use gasoline or other flammable liquids or vapors within 25 feet (7.5 m) of this
appliance.
Keep the surrounding area clear and free from combustible materials such as firewood, wet clothing,
gasoline and other flammable vapors and liquids, etc.
Do not alter stove in any manner.
Do not use the stove unless it is completely assembled and all components are securely fastened and
tightened.
This stove is designed to burn natural wood. It is strictly forbidden to use coal and coal briquettes.
Do not start a fire with vapors, chemicals or fluids such as gasoline, engine oil, alcohol, etc.
Do not touch the stove or its parts while they are hot and educate all children of the danger of a high-
temperature appliance. Children and pets should be supervised when they are in the area close to the
burning stove or in the same room.
Never touch cooking surface, ash drawer and other components to check their temperature.
Do not touch metal parts of the stove until it has completely cooled to avoid burns, unless you are
wearing protective gear (pot holders, gloves, mittens, etc.).
Wear protective gloves when adding fuel to retain desired heat mode.
Do not let the stove become hot enough for any part to glow red.
Attempts to achieve heat output rates that exceed design specifications can result in steel distortion and
damage.
Do not connect to the electrical clamp outlets electrical devices with power consumption over 50W.
Such connection may damage the electricity generating components.
When connecting electrical devices to the external outlets make sure that polarity of terminals is
correct.
