6.MARKING AND PACKING OF THE STOVE
6
.1. Marking
6
.2. Packing
6
.3 Procedure of remove the packaging by a consumer
7
. SUITABLE APPLICATION
7
.1. Operational constraints
On a stove there is an information code plate with details about a model of a stove, its mass, factory serial
number, production date of a stove and other technical features, and also the information on certificates for this
model.
A stove is packed in a transport pack. Maintenance manual in a packaging bag and components are enclosed in
the stove combustor.
On a pack of a stove at the front part there is a label with information about a model of a stove, its mass, design
features and production date.
1. Cut a packing tape
2. Remove cardboard boxes
3. Remove a polyethylene
4. Pull from a stove maintenance manual and components (if available) and take off a packing
5. Take away blocks and turn off fixing bolts
6. Remove advertising stickers from a surface of a protective film.
ATTENTION! Don't use the stove for industrial premises of categories A, B, V of fire and explosion safety in
accordance with NPB (ÍÏÁ) 105-95 (classification of premises and buildings of fire and explosion
safety).
ATTENTION! Don't use matters as fuel which aren't mentioned under point
4
.
ATTENTION! Expressly prohibited using charcoal and coal briquettes as fuel.
ATTENTION! Don't use alcohol-containing means, benzene, kerosene and other highly inflammable
matters for ignition. Don't use a glossy paper, trimmings of wood particle boards, laminated flooring board,
orgalite because these matters would evolve noxious substances under burning, and would be cause of
outburst and damage of a stove.
ATTENTION! Don't use the stove with an empty heat exchange unit and a hot-water tank or an
unconnected system of water heating (if available).
ATTENTION! Don't use the stove inappropriately.
ATTENTION! Don't use the stove in autohouses, trailers and tents.
ATTENTION! Don't commit overheating of the stove at the time of its operation.
Overheating of the stove can be identified by red glow of the metal in the dark.
This situation can appear upon the uncontrolled air supply into the fire box. For example, when the door is
open. The stove warming up may lead to dangerous conditions of the stove operation and its premature breakdown.
Summary of Contents for Battery Fire 11
Page 1: ...Battery Fire USER MANUAL ...
