background image

Secondary air enters the firebox through the after burners.
The removable protection (15)

 

with the grate

 (13) 

is installed at the bottom of 

the firebox. 

Reasonable in configuration the firebox bottom does not let unburned coals 

collect. Ashes

 and slag 

gradually

 pour on the 

cast iron

 

grate

 (13) 

under the influence 

of gravity

 

and through its slots

 fall into the ash box, 

with the help of which you can 

clean the stove easily, without interrupting the combustion process.

There is a sealed ash drawer

 in «Battery-Fire» stoves. 

When passing to energy-

saving conditions

 

it is pushed into the ashtray and 

«

snaps

»

 to the ledge (see. Figure 

10). The seal on the

 drawer front wall let 

it full close

.

The upper body surface is used as a cooking top

 (1). 

There

 is 

a

 cast iron burner 

(2) (

which may be solid or the circle with a cover)

 

on the cooking top to accelerate 

cooking

 process. 

ATTENTION!

 Cooking 

top

 is heated to a high temperature 

The stove external surface is coated with a heat-resistant organosilicon enamel of KO-868

 type.

ATTENTION!

 

The manufacturer reserves the right to change the stove design, without impairing its 

consumer properties.

Fire gases

 are directed i

nto the flue through the

 flue 

outlet of 120 mm diameter disposed at the rear of the 

stove

There is a damper in the flue outlet to regulate flue draft.

«Battery-Fire» provides an opportunity to set the 

flue stack both backwards 

(Figure 11

a

and upwards 

(see. 

Figure 11.b)

Figure

 9. «

Battery-Fire

 7WT» 

General

 

view

 

and

 

the main elements location

 

Cooking top

2 - Cast iron burner 

3 - Deflector

4 - Firebox door

5 - Translucent wall

6 - Firebox

 

7 - Fine adjustment valve

 

Ash drawer

 

9 - Flue damper lock 

10 

 

Flue stack outlet

 

11 

 

Slot convector panel

12 

 

Heat exchanger tank

13 

 

Cast iron grate

14 

 

Support legs

15 

 

Firebox protection

15

Figure 10.  Sealed ash drawer

.

Seal 

Ashtray ledge 

à) flue stack set backwards

Figure

 11.  

Variants for flue stack installation.

b

flue stack set upwards

Summary of Contents for Battery Fire 11





















Reviews: