76
CONNECTING THE BLOWER TO THE
HEATING CARTRIDGE
①
Pull the 2 female con-
nection lugs out from
the connector casing.
②
Put the female lugs
on the male contacts.
Ensure to connect
them correctly as
shown opposit.
③
Push the wires inside
the cartridge casing
and fit it onto the
base of the cartridge.
Overcoming the seal
resistance, slide the
housing up and push
it all the way.
④
Tighten the locking
screw at the back of
the casing using an Al-
len key (not supplied).
