67
EN
PIN CODE INITIALISATION
By default, the PIN code is not enabled. The setting access
is available in Standby mode only.
①
By default registered PIN code is 0000.
Press
or
to select 0. It is blinking. Save by
pressing
.
1
2
②
For others numbers, select 0 by press
.
When 0000 appears, press on
again to save and
exit.
The PIN code is initialized, the next setting automaticaly
appears: PIN Code activation.
ACTIVATION/DEACTIVATION OF THE PIN CODE
①
Off
appears on the display.
Press
or
to enable PIN code.
On
appears on the display.
On
= PIN code enabled
Off
= PIN code disabled
②
Press
to save and return to the home installer
settings display.
The PIN code is enabled. Any modification of reserved
settings listed in «Overview» is now impossible.
CUSTOMIZING THE PIN CODE
If you have just activated the PIN code, follow the stages
described below.
Alternatively, you must copy the steps 1 and 2 of the
initialisation process as well as the steps 1 and 2 of the
activation process before personalising the PIN code.
Please remember that the personalisation of the PIN code
can only be set once the initialisation and activation of
the PIN code has been completed.
①
When
On
appears, press
for at least 5 seconds.
5 sec.
②
The 0000 code appears and the first digit blinks.
Press
or
to select the first desired digit then
press
to save and exit. Repeat this operation for
remaining 3 digits.
1
2
