71M6521 Demo Board User’s Manual
Revision 2.18
© 2005-2009 TERIDIAN Semiconductor Corporation
Page: 19 of 111
Commands controlling the CE:
C
COMPUTE ENGINE
CONTROL
Description:
Allows the user to enable and configure the compute engine.
Usage:
C [option] [argument]
Command
combinations:
CEn
Compute Engine Enable (1
Enable, 0
Disable)
CTn
Select input n for TMUX output pin. Enter n in hex
notation.
CREn
RTM output control (1
Enable, 0
Disable)
CRSa.b.c.d
Selects CE addresses for RTM output (maximum of
four)
Example:
CE0
Disables the CE
CT1E
Selects the CE_BUSY signal for the TMUX output pin
Calibration Commands:
CL
CALIBRATION CONTROL
Description:
Calibration-related commands. A full auto-calibration can be implemented by compiling the
Demo Code with auto-calibration selected as an option. Due to space restrictions, the
auto-calibration is not implemented in the Demo Code supplied with the Demo Boards.
Usage:
CL [option]
Command
combinations:
CLC
Switches the CLI to Intel hex format, e.g. for loading
calibration data via the serial port
CLD
Restores calibration to defaults
CLR
Restores calibration from EEPROM
CLS
Saves calibration to EEPROM
Commands for Identification and Information:
I
INFORMATION MESSAGES
Description:
Allows user to display information messages.
Usage:
I
Example:
I
Returns the Demo Code version
The I command is used to identify the revisions of Demo Code and the contained CE code.
