2.
NOTE:
All rubber components in the treadle valve should be replaced yearly.
An increase in stopping distance or a low pressure warning light indicated a
malfunction in the brake system, and although the vehicle brake system may
continue to function, the vehicle should not be operated until the necessary
repairs have been made and both braking circuits are operating normally.
LEAKAGE CHECK
1.
Make and hold full brake application.
2.
Coat the exhaust port and body of the brake valve with soap solution.
3.
Leakage is not to exceed a 1” bubble in 3 seconds in both the applied and released
position.
If the brake does not function as described above or leakage is excessive, it is
recommended that it be replaced with a new or remanufactured unit, or repaired with
genuine Bendix parts available at Bendix outlets.
PARKING BRAKE
153
P/N 12261-319 REVISED: August 2012
Summary of Contents for RT200-1
