Terex RT200-1, Operator'S Manual

Page: 136 / 212

MONTHLY CHECK (160 HOURS)
___ Perform Daily And Weekly Checks ___ Obtain Hydraulic Oil Sample for Analysis.
___ Perform Monthly Lubrication ___ Clean Radiator Exterior
___ Check Engine Belts
___ Check Engine Manufacturer’s Manual For
Additional Maintenance Requirements
___ Drain Hydraulic Reservoir Of
Moisture
QUARTERLY CHECK (500 HOURS)
___ Perform Daily, Weekly And
Monthly Checks
___ Replenish Cooling System Corrosion Inhibitor
___ Perform Quarterly Lubrication
___ Check Engine Manufacturer’s Manual For
Additional Maintenance Requirements
___ Drain Fuel Tank Of Water And
Sediment
___ Lubricate Valve Disconnects
___ Change Transmission Filter ___ Clean And Wax All Exterior Painted Surfaces
___ Change Hydraulic Return Line
Filters
___ Check Brake Reservoir Fluid Level
SEMI. ANNUAL CHECK (1000 HOURS)
___ Perform Daily, Weekly, Monthly
And Quarterly Checks
___ Change Winch Oil
___ Clean Crankcase Breather ___ Change Axle Oil
___ Clean Cooling System ___ Check Brake Shoes for Wear Condition
___ Check Reservoir Relief Valve ___ Check Relief Valve Pressure Settings
___ Clean Reservoir Intake Suction
Filter ___ Check Engine Manufacturer’s Manual For
Additional Maintenance Requirements
___ Change Transmission Oil ___ Torque Swing Bearing Bolts
OTHER INTERVALS
250 HOURS - CUMMINS ENGINE:
- Change Engine Oil and Filter
- Check Engine Air Intake
- Change Engine Air Cleaner Element
- Check Engine Drive Belt Tension
1500 HOURS:
- Drain And Clean Hydraulic Reservoir
- Change Hydraulic Fluid
135 P/N 12261-319 REVISED: August 2012
Courtesy of Crane.Market