Instructions for Loading and Unloading
LOADING EQUIPMENT
Prior to operation, read and understand the manuals provided with this
equipment. Also read and follow all general safety rules.
PREPARE TRAILER
Assure that any ramps are in position or trailer is otherwise prepared for loading and path
of travel is clear for loading. All other necessary preparations of trailer must be performed.
PRE-START INSPECTION
Complete Pre-Start Inspection of machine as described in
Pre-Start Inspection on page 79
.
STARTING THE ENGINE
At ambient temperatures over 32° F on Cummins engines, follow the starting procedure
below:
1.
Move the transmission shift lever to the neutral position.
2.
Put the parking brake switch in the “ON” position.
3.
Turn the ignition switch to the “ON” position. Wait to start light goes off.
4.
Turn the ignition switch to the “START” position to start the engine.
Release the ignition switch key as soon as the engine starts.
PRE-MOVE CHECK LIST
Perform Pre-Move Checklist as described in
Vehicular Operation on page 115
.
VEHICULAR OPERATION
Direction of travel depends on the method of loading used. When backing the equipment
onto the trailer, the reverse gear will be used. When driving forward onto the trailer the
forward gear will be used.
If machine is equipped with four-wheel drive, engage it by using the low range. Do not
attempt to engage fourwheel drive while wheels are moving.
To drive the equipment forward onto the trailer apply foot brake, then release parking brake
using switch on left side of dash. Move transmission select lever into F1 position by pulling
the lever on the right side of the steering column toward you and moving it up one position.
Slowly release foot brake to begin travel. Use throttle pedal to increase speed only if
necessary. All loading should be done at slowest speed possible. Use steering wheel to
control direction of front tires. Use brake pedal to stop. If necessary, you may use rear
steer, if equipped. Toggle switch to move tires left and right.
Transportation
119
P/N 12261-319 REVISED: August 2012
Summary of Contents for RT200-1
