Terex PT-30, Service Manual

Page: 95 / 116

Compact Track Loader
13. Loader Disassembly and Assembly
13-10
Collect and contain liquids in a suitable
container. Dispose of all liquids according to local
regulations and mandates.
Note : During disassembly, cap all hoses and fittings to
prevent fluid loss and contamination of the system fluids.
1. Lower the lift arms to the ground.
2. Turn the engine start switch to the OFF position
and remove the key to avoid accidental start.
Figure 13-39
3. Press the button on top of the quick coupler
block to release hydraulic pressure.
Figure 13-40
4. Disconnect and cap all three hydraulic tubes.
Figure 13-41
5. Remove the four bolts that secure the quick
coupler block to the loader frame and remove
the block.
Quick Coupler Block / Pressure Release
Valve Installation
Figure 13-42
1. Install the four bolts that secure the quick
coupler block to the loader frame.
Figure 13-43
2. Reconnect all three hydraulic tubes.
Disconnect
Tubes
Remove
Bolts
Install
Bolts
Reconnect
Tubes