Operator's Manual
Fifth Edition • First Printing
Specifications
76
Z
®
-80/60
Part No. 1294418GT
Specifications
Model
Z-80/60
Height, working maximum
84 ft
25.6 m
Height, platform maximum
78 ft
23.8 m
Height, stowed maximum
9 ft 10 in
3 m
Horizontal reach, maximum
60 ft
18.3 m
Width
8 ft 2 in
2.5 m
Length, stowed
37 ft
11.3 m
Length, stowed for transport
30 ft
9.1 m
Maximum load capacity
500 lbs
227 kg
Maximum wind speed
28 mph
12.5 m/s
Wheelbase
9 ft 4 in
2.84 m
Ground clearance
12 in
30 cm
Turning radius (outside)
2 wheel steer
4 wheel steer
24 ft 6 in
15 ft
7.5 m
4.5 m
Turning radius (inside)
2 wheel steer
4 wheel steer
14 ft 6 in
7 ft
4.4 m
2.1 m
Turntable rotation (degrees)
Continuous
Turntable tailswing,
secondary boom lowered
7 ft 4 in
2.24 m
Turntable tailswing,
secondary boom raised
3 ft 10 in
1.17 m
Ambient operating
temperature
-40° F to 120° F
-40° C to 49° C
Low end of temperature range requires the use of special
hydraulic and engine oils.
Controls
12V DC proportional
Platform dimensions, 6 foot
(length x width)
72 x 30 in
182 x 76 cm
Platform dimensions, 8 foot
(length x width)
96 x 36 in
244 x 91 cm
Platform leveling
self-leveling
Platform rotation
160°
AC outlet in platform
standard
Hydraulic pressure, maximum
(boom functions)
3200 psi
220 bar
System voltage
12V
Tire size
18-625, 16 ply FF
Weight
37,500 lbs 17.010 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Fuel tank capacity, diesel
35 gallons 132 liters
Fuel tank capacity, gasoline
30 gallons 114 liters
Total vibration value to which the hand/arm system is
subjected does not exceed 2.5 m/s
2
.
Highest root mean square value of weighted acceleration to
which the whole body is subjected does not exceed
0.5 m/s
2
.
Airborne noise emissions
Guaranteed sound power level
107dBA
Sound pressure level at ground workstation
85dBA
Sound pressure level at platform workstation
74dBA
Maximum slope rating, stowed position, 2WD
Counterweight uphill
30% 17°
Counterweight downhill
15%
9°
Side slope
25% 14°
Maximum slope rating, stowed position, 4WD
Counterweight uphill
45% 24°
Counterweight downhill
35% 19°
Side slope
25% 14°
Maximum allowable chassis inclination
Parallel to boom structure
4.5°
Perpendicular to boom structure
4.5°
Note: Slope rating is subject to ground conditions with one
person in the platform and adequate traction. Additional
platform weight may reduce slope rating.
Drive speeds (foam-filled tires)
Drive speed, stowed
3 mph
40 ft/9.1 sec
4.8 km/h
12.2 m/9.1 sec
Drive speed, raised or
extended
– all models
0.7 mph
40 ft/40 sec
1.1 km/h
12.2 m/40 sec
Drive speeds (high flotation tires)
Drive speed, stowed
1.9 mph
40 ft/13.6 sec
3.1 km/h
12.2 m/13.6 sec
Drive speed, raised or
extended
– all models
0.44 mph
40 ft/62 sec
0.64 km/h
12.2 m/62 sec
Floor loading information
Tire load maximum
22,500 lbs
10,206 kg
Tire contact pressure
130 psi
9.1 kg / cm
2
896 kPa
Occupied floor pressure
377 psf
1841 kg / m
2
18.5 kPa
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should be
used only with adequate safety factors.
Continuous improvement of our products is a Genie policy.
Product specifications are subject to change without notice
or obligation.
Summary of Contents for Genie Z-80/60
