Terex Genie Z-80/60, Operator'S Manual

Page: 41 / 80

Fifth Edition • First Printing
Operator's Manual
Inspections
Part No. 1294418GT Z
®
-80/60 39
At the Platform Controls
Test Emergency Stop
23 Turn the key switch to platform control.
24 Push in the platform red Emergency Stop
button to the off position.
Result: The engine should shut off and no
functions should operate.
25 Pull out the red Emergency Stop button and
restart the engine.
Test the Hydraulic Return Filter
26 Press the engine idle speed select button or
move the switch until the indicator light next to
the high idle (rabbit symbol) is on.
27 Locate and check the hydraulic filter condition
indicator.
Result: The filter should be operating with the
plunger or the needle in the green area.
28 Press the engine idle speed select button or
move the switch until the indicator light next to
the foot switch activated high idle (rabbit and
foot switch symbol) is on.
Test the Horn
29 Press the horn button.
Result: The horn should sound.
Test the Tilt Sensor Alarm
30 Push a button or move a switch, such as the
engine idle select.
Result: The alarm should sound at the
platform controls.
Test the Foot Switch
31 Push in the platform red Emergency Stop
button to the off position.
32 Pull out the red Emergency Stop button to the
on position and do not start the engine.
33 Press down the foot switch and attempt to
start the engine.
Result: The engine should not start.
34 Do not press down the foot switch and restart
the engine.
Result: The engine should start.
35 Do not press down the foot switch and test
each machine function.
Result: No functions should operate.
Test Machine Functions
36 Press down the foot switch.
37 Activate each machine function control handle,
toggle switch or button.
Result: All functions should operate through a
full cycle.