Seventh Edition • First Printing
Operator's Manual
Specifications
Part No. 1297932GT
Z
®
-30/20N • Z
®
-30/20N RJ
53
Specifications
Z-30/20N without rotating jib
Height, working maximum
36 ft
11 m
Height, platform maximum
30 ft
9.1 m
Height, stowed maximum
6 ft 7 in
2 m
Horizontal reach, maximum
21 ft 5 in
6.5 m
Width
3 ft 11 in
1.2 m
Length, stowed
16 ft 9 in
5.1 m
Maximum load capacity
500 lbs
227 kg
Maximum wind speed
28 mph
12.5 m/s
Wheelbase
5 ft 3 in
1.6 m
Turning radius (outside)
10 ft 7 in
3.2 m
Turning radius (inside)
5 ft 5 in
1.7 m
Turntable rotation
359°
Turntable tailswing
0°
Power source
8 Group 903, L-16,
6V 390AH Batteries
Controls
24V DC Proportional
Platform dimensions (length x
width)
46 in x 30 in
1.17 m x 76 cm
Platform leveling
self-leveling
Platform rotation
180°
AC outlet in platform
Standard
Hydraulic pressure, maximum
(boom functions)
2800 psi
193 bar
System voltage
48V
Tire size, solid rubber
22 x 7 x 17.75 in
56 x 18 x 45 cm
Highest root mean square value of weighted
acceleration to which the whole body is subjected does
not exceed 0.5 m/s
2
.
Ambient operating temperature
-20° F to 120° F
-29° C to 49° C
Ground clearance
3.5 in 8.9 cm
Weight
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Drive speeds
Drive speed, stowed
3.0 mph
40 ft/9 sec
4.8 km/h
12.2 m/9 sec
Drive speed, raised or
extended
0.7 mph
40 ft/40 sec
1.0 km/h
12.2 m/40 sec
Maximum slope rating, stowed position
Platform downhill
35%
19°
Platform uphill
20%
11°
Side slope
25%
14°
Note: Slope rating is subject to ground conditions with
one person in the platform and adequate traction.
Additional platform weight may reduce slope rating.
Airborne noise emissions
Sound pressure level at ground
workstation
< 70 dBA
Sound pressure level at platform
workstation
< 70 dBA
Floor loading information
Tire load maximum
7,350 lbs
3,334 kg
Tire contact pressure (per
tire)
103 psi
710 kPa
7.24 kg/cm
2
Occupied floor pressure
535 psf
25.62 kPa
2,612 kg/m
2
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
Summary of Contents for Genie Z-30N
Page 59: ......
