Seventh Edition • First Printing
Operator's Manual
Operating
Instructions
Part No. 1297932GT
Z
®
-30/20N • Z
®
-30/20N RJ
41
To Drive
1
Press down the foot switch.
2
Increase speed: Slowly move the control
handle off center.
Decrease speed: Slowly move the control
handle toward center.
Stop: Return the control handle to center or
release the foot switch.
Use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the machine will travel.
Machine travel speed is restricted when the booms
are raised or extended.
Battery condition will affect machine performance.
Driving on a slope
Determine the uphill, downhill and side slope
ratings for the machine and determine the slope
grade.
Maximum slope rating, platform
downhill (gradeability): 35% (19°)
Maximum slope rating, platform
uphill: 20% (11°)
Maximum side slope rating:
25% (14°)
Note: Slope rating is subject to ground conditions
with one person in the platform and adequate
traction. Additional platform weight may reduce
slope rating. The term gradeability applies to the
platform downhill configuration only.
Be sure the boom is below horizontal and the
platform is between the non-steer wheels.
Summary of Contents for Genie Z-30N
Page 59: ......
