Operator's Manual
Seventh Edition • First Printing
Transport and Lifting Instructions
48 Z
®
-30/20N • Z
®
-30/20N RJ
Part No. 1297932GT
Free-wheel Configuration for
Winching
1
Chock the wheels to prevent the machine from
rolling.
2
Release the
non-steer wheel
brakes by turning
over the drive hub
disconnect caps.
3
Be sure the winch line is properly secured to
the drive chassis tie points and the path is
clear of all obstructions.
After the machine is loaded:
1
Chock the wheels to prevent the machine from
rolling.
2
Apply the non-steer wheel brakes by turning
over the drive hub disconnect caps.
Towing the Genie Z-30/20N is not recommended.
If the machine must be towed, do not exceed
2 mph / 3.2 km/h.
Securing to Truck or Trailer for
Transit
Always chock the machine wheels in preparation
for transport.
Turn the key switch to the off position and remove
the key before transporting.
Inspect the entire machine for loose or unsecured
items.
Securing the Chassis
Use the tie-down points on the chassis for
anchoring down to the transport surface.
Use chains or straps of ample load capacity.
Use a minimum of 4 chains or straps.
Adjust the rigging to prevent damage to the chains.
Summary of Contents for Genie Z-30N
Page 59: ......
