Terex Genie Superlift Contractor, Operator'S Manual, Page: 23 / 38

Second Edition • First Printing Operator's Manual
Inspections
Part No. 1314196GT Genie Superlift Contractor ® 21
Adjustable Forks and Adjustable Fork
Options
1 Place the forks inside the carriage.
2 Insert the retaining pin.
3 Adjust the forks to
the desired width
and be sure the
snap pin is properly
inserted in each
fork.
Load Platform with Adjustable Forks
1 Adjust the forks to a width of 23 inches /
58.4 cm.
2 Place the load platform on the adjustable
forks.
Pipe Cradle
1 Attach the pipe cradles to the forks. Be sure
the fasteners are tightened.
Fork Extensions
1 Slide each extension tube onto the forks.
2 Adjust to the desired position and insert the
retaining pins.
Standard Boom
1 Place the boom inside the carriage.
2 Insert the retaining pin.
3 Attach the lifting shackle to the desired hole on
the boom.
Test One-Speed Winch Operation
1 Install a load handling attachment.
2 Raise the carriage by firmly grasping the winch
handles and rotating them towards the mast.
Result: The winch should operate smoothly,
free of hesitation or binding.
3 Lower the carriage by
firmly grasping the
winch handles and
rotating them away
from the mast. After
lowering to the desired
position, turn the winch
handles toward the
mast (raise the load)
1/4 turn to set the
brakes.
Result: The winch should operate smoothly,
free of hesitation or binding.