Terex Genie Superlift Contractor, Operator'S Manual, Page: 20 / 38

Operator's Manual Second Edition • First Printing
Inspections
18 Genie Superlift Contractor
®
Part No. 1314196GT
Pre-operation Inspection

Be sure that the operator’s manual is
complete, legible and in the storage container
located on the machine.

Be sure that all decals are legible and in place.
See Decals section.
Check the following components or areas for
damage, improperly installed, or missing parts and
unauthorized modifications:

Winch and related components

Base components

Legs

Stabilizers and latch plates (if equipped)

Mast columns

Exterior plastic shim for safety brake (if
equipped)

Carriage hold-down bar

Cable anchor

Cable and pulleys

Wheels and casters

Load handling attachments

Nuts, bolts and other fasteners

Cable (kinks, frays and abrasions)
Check entire machine for:

Cracks in welds or structural components

Dents or damage to machine

Excessive rust, corrosion or oxidation

Verify that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.

Be sure there is a minimum of 4 wraps of
cable around the winch drum when the
carriage is fully lowered.