September 2016
Part No. 1272856
GTH-1256
3-21
Section 3 • Repair Procedures
FUEL AND HYDRAULIC TANK
11 Using an approved hand-operated pump,
drain the fuel tank into a container of suitable
capacity. Refer to Section 2, Speci
fi
cations.
WARNING
Explosion and
fi
re hazard. When
transferring fuel, connect a
grounding wire between the
machine and pump or container.
Note: Be sure to only use a hand operated pump
suitable for use with gasoline and/or diesel fuel.
12 Remove all the screws.
13 Loosen all the clamps and pull out the hoses.
14 Remove the wire harness from bulb on the
hydraulic
fi
lter.
15 Place a container of suitable size under the
hydraulic hoses before disconnecting.
NOTICE
Used oils must be handled and
disposed of according to local
regulations.
16 Disconnect all hydraulic hoses.
17 Remove the retaining fasteners securing the
tanks to the machine.
18 Using a lifting strap and an overhead crane,
remove the tanks from the machine.
WARNING
Crushing hazard. The tanks
could become unbalanced and
fall if not properly supported
when removed from the
machine.
