Second Edition • First Printing
Operator's Manual
Load Capacity Charts
Part No. 1314200GT
Genie Lift
™
29
Load Capacity Charts
Observe and Obey:
Failure to properly position the load may result
in death or serious injury.
Verify that the load you wish to raise does not
exceed the maximum load for your load
center. See the load capacity charts on the
next page.
Tip-over hazard. Raising a load
that exceeds the machine
capacity may result in death or
serious injury.
A load center is defined as the balancing point
(center of gravity) of a load and must be
positioned within the load center zone.
Tip-over hazard. Failure to
position the load center within
the load center zone may result
in death or serious injury.
Forks
Load Positioning Instructions
1
Determine the weight of the load and the
location of its load center.
2
Measure to the load center from the side of the
load that will be closest to the carriage.
3
Refer to the chart on the next page to
determine if the machine is capable of lifting
the weight at the location on the forks.
4
Place the load so that it rests on the forks, as
close to the carriage as possible.
5
Position the load so that the load center is
within the load center zone.
mea
su
re t
o t
he load c
ente
r
1. Load Center Zone
