Section 3 • Scheduled Maintenance Procedures
3 - 20
AL8000HT Light Tower
Part No. 116478
REV A
September 2008
CHECKLIST
C
PROCEDURES
C-3
Perform Axle Maintenance
Note: Axle specifications require that this procedure
be performed every 6 months or 6000 miles,
whichever comes first.
Proper axle maintenance, following the axle
manufacturer's maintenance schedule, is essential
to good axle performance and service life. Failure
to perform the maintenance procedures can lead to
poor axle performance and component damage.
Required maintenance procedures and additional
axle information is available in the
Axis Axle
Operator Maintenance Manual included with your
machine.
Axis Axle Operator Maintenance Manual
Terex part number
116117
C-4
Perform Engine Maintenance -
Isuzu Models
Note: Engine specifications require that this
procedure be performed every 750 hours.
Required maintenance procedures and additional
engine information is available in the
Isuzu 4LE1 Diesel Engine Instruction Manual
(Isuzu part number IDE-6033).
Isuzu 4LE1 Diesel Engine Instruction Manual
Terex part number
116133
