GLW760 IP User Manual XM1586-V1.1-NR
12
5.5.
RIGGING USING THE OMEGA BRACKETS
Fix the clamp to the bracket by tightening the M12 nut and bolt to the bracket through the
Ф13 hole in the middle of the bracket
.
Insert the quick-lock fasteners of the first Omega holder into the respective holes on the
bottom of the device
.
Tighten the quick-lock fasteners fully clockwise
.
Install the second Omega holder
.
Pull the safety cable through the holes on the bottom of the base and over the trussing
system or another suitable rigging point
.
Insert the end into the carabiner and tighten the
safety screw
.
Important:
This step is very important to ensure safe rigging of the fixture
.
