manualshive.com logo in svg

Terbly GL2P, User Manual

Share
Download
Terbly GL2P User Manual Download Page 36

  GL2P  User  Manual                                                                                                                                XM1460-V1.0-NR

35

defective (or its driving IC on the main PCB). The CTO - movement is not located in the default
position after the reset.

ROT_GOBO wheel Er
(ROT_GOBO  wheel-  error)  This  message  will  appear  after  the  reset  of  the  fixture  if  the  head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB). The ROT_GOBO - movement is not located in the
default position after the reset.

ROT_GOBO_R wheel Er
(ROT_GOBO_R wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB). The ROT_GOBO_R - movement is not located in
the default position after the reset.

FIX_GOBO wheel Er
(FIX_GOBO wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB). The FIX_GOBO - movement is not located in the
default position after the reset.

IRIS wheel Er
(IRIS wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB). The IRIS - movement is not located in the default
position after the reset.

PRISM wheel Er
(PRISM wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective  (or  its  driving  IC  on  the  main  PCB).  The  PRISM  -  movement  is  not  located  in  the
default position after the reset.

PRISM_R wheel Er
(PRISM_R wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective  (or  its  driving  IC  on  the  main  PCB).  The  PRISM  -  movement  is  not  located  in  the
default position after the reset.

BLADE wheel Er
(4_BLADE wheel_ error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective  (or  its  driving  IC  on  the  main  PCB).  The  BLADE  -  movement  is  not  located  in  the
default position after the reset.

BLADE_ROT wheel Er
(4_BLADE_ROT wheel_ error) This message will appear after the reset of the fixture if the
head’s magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper
motor is defective (or its driving IC on the main PCB). The BLADE_ROT - movement is not
located in the default position after the reset.

Summary of Contents for GL2P







































Reviews:

No comments

Brands by name

Popular brands

Load more brands