manualshive.com logo in svg

Terbly GL2P, User Manual

Share
Download
Terbly GL2P User Manual Download Page 20

  GL2P  User  Manual                                                                                                                                XM1460-V1.0-NR

19

4. The display show “OFF”, Press <Up/Down>, the display will show “ON”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Pan Degree

With this function, you can select pan degree for 630 or 540.

1. Tap <MODE/ESC> button

access the main menu

Tap the <Up/Down> button until

“Personality” is displayed. Press ENTER, the display will show “Personality”. Tap the
<Up/Down> button until the display will show “Status settings”. Press ENTER, the
display will show “Status settings”.

2. Press <Up/Down>, the display will show “Pan Degree”.
3. Press< ENTER>, the display will show “Pan Degree”.
4. The display show “540”, Press <Up/Down>, the display will show “630”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Feedback
With this function, you can feedback switch of pan movement or tilt movement.

1. Tap <MODE/ESC> button

access the main menu

Tap the <Up/Down> button until

“Personality” is displayed. Press ENTER, the display will show “Personality”. Tap the
<Up/Down> button until the display will show “Status settings”. Press ENTER, the
display will show “Status settings”.

2. Press <Up/Down>, the display will show “Feedback”.
3. Press< ENTER>, the display will show “Feedback”.
4. The display show “ON”, Press <Up/Down>, the display will show “OFF”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Hibernation: Standby mode

The device and step motors will be power off if the fixture stay without DMX signal for 15
mins (Factory default).And the fixture will be reset before working once it receive DMX
signal again.

1. Tap <MODE/ESC> button

access the main menu, Tap the <Up/Down> button until

“Personality” is displayed. Press ENTER, the display will show “Personality”. Tap the
<Up/Down> button until the display will show “Status settings”. Press ENTER, the
display will show “Status settings”.

2. Press <Up/Down>, the display will show “Hibernation”.
3. Press< ENTER>, the display will show “Hibernation”.
4. The display show “15M”,Press   <Up/Down>, the display will show “01M” ”02M” ….

“99M” or “OFF”.

5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

9.3.2. Service Setting
   Password

The Password for this function is “50”.

  RDM 

PID

With this function you can call up various submenus via RDM.
This device is RDM ready. RDM stands for "remote device management" and makes remote
control of devices connected to the DMX-bus possible. ANSI E1.20-2006 by ESTA specifies
the RDM standard as an extension of the DMX512 protocol.

Manual settings like adjusting the DMX starting address are no longer needed. This is
particularly useful when the device is installed in a remote area.

Summary of Contents for GL2P







































Reviews:

No comments

Brands by name

Popular brands

Load more brands