manualshive.com logo in svg

Terbly GL2P, User Manual

Share
Download
Terbly GL2P User Manual Download Page 16

  GL2P  User  Manual                                                                                                                                XM1460-V1.0-NR

15

9.1. FUNCTION

9.1.1. Set DMX Address
With this function, you can adjust the desired DMX-address via the Display.

1. Access the main menu.
2. Tap the <Up/Down> button until “Set DMX Address” is displayed.
3. Press ENTER, the display will show “Set DMX Address”.
4. Tap the <Up/Down> button, the display will show “A001~AXXX”
5. Press ENTER to confirm or press <MODE/ESC> to return to the main menu.

9.1.2. DMX Value
With this function you can display the DMX 512 value of each channel. The display
automatically shows the channel with a changing value.

1. Access the main menu.
2. Tap the <Up/Down> button until” Dmx Value” is displayed.
3. Press ENTER, the display will show “Dmx Value”.
4. Tap the <Up/Down> button

choose each channel.

5. Press ENTER to confirm or press <MODE/ESC> to return to the main menu.

9.1.3. Slave Mode
With this function, you can define the device as slave.

1. Access the main menu.
2. Tap the <Up/Down> button until “Slave Mode” is displayed.
3. Press ENTER, the display will show “Slave Mode”.
4. Tap the <Up/Down> button

the display will show “Slave1”, “Slave2”, “Slave3”.

5. Press ENTER to confirm or press <MODE/ESC> to return to the main menu.

9.1.4. Auto Program
With this function, you can run the internal program. You can select the desired program under
“Select program”.  You  can  set  the  number  of  steps  under “Edit program”. You can edit the
individual scenes under “Edit scenes”. With this function, you can run the individual scenes
either automatically, i.e. with the adjusted Step-Time.

1. Access the main menu.
2. Tap the <Up/Down> button until “Auto Program” is displayed.
3. Press ENTER, the display will show “Auto Program”.
4. Tap the <Up/Down> button

the display will show “Master1”, “ Alone”.

Edit Scenes/

Edit Scene 001

~ Edit Scene

250/

Control,Pan,……/

--Fade Time—/

--Scene Time--/

Input By Out/

Save and automatically

return manual scenes

edit

Rec. Controller/

Up/Dn              Le/Ri

Start  sc             End  sc/

XXX

—

>  XXX

Automat. scenes rec

L

a

n

g

u

a

g

e

S

e

t

English/Chinese

Choose English or

Chinese

Summary of Contents for GL2P







































Reviews:

No comments

Brands by name

Popular brands

Load more brands