manualshive.com logo in svg

Terbly GL2P, User Manual

Share
Download
Terbly GL2P User Manual Download Page 19

  GL2P  User  Manual                                                                                                                                XM1460-V1.0-NR

18

2. Press <Up/Down>, the display will show “Software Ver”.
3. Press< ENTER>, the display will show “Software Ver”.
4. The display show “Ver x.x.x”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

9.3. PERSONALITY

9.3.1. Status Settings

Address via DMX
With this function, you can adjust the desired DMX-address via an external controller.

1. Tap <MODE/ESC> button

access the main menu

Tap the <Up/Down> button until

“Personality” is displayed. Press ENTER, the display will show “Personality”. Tap the
<Up/Down> button until the display will show “Status settings”. Press ENTER, the
display will show “Status settings”.

2. Press <Up/Down>, the display will show “Address via DMX”.
3. Press< ENTER>, the display will show “Address via DMX”.
4. The display show “ON”, Press <Up/Down>, the display will show “OFF”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

No DMX Status
With this function, when the drive is not DMX signal, it runs automatism, close, hold and
music, the default is hold.

1. Tap <MODE/ESC> button, access the main menu

Tap the <Up/Down> button until

“Personality” is displayed. Press ENTER, the display will show “Personality”. Tap the
<Up/Down> button until the display will show “Status settings”. Press ENTER, the
display will show “Status settings”.

2. Press <Up/Down>, the display will show “No DMX Status”.
3. Press< ENTER>, the display will show “No DMX Status”.
4. The display show “Hold”, Press <Up/Down>, the display will show “Close”, “Auto”,

“Music”.

5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Pan Reverse

With this function you can reverse the Pan-movement.

1. Tap <MODE/ESC> button, access the main menu

Tap the <Up/Down> button until

“Personality” is displayed. Press ENTER, the display will show “Personality”. Tap the
<Up/Down> button until the display will show “Status settings”. Press ENTER, the
display will show “Status settings”.

2. Press <Up/Down>, the display will show “Pan Reverse”.
3. Press< ENTER>, the display will show “Pan Reverse”.
4. The display show “OFF”, Press <Up/Down>, the display will show “ON”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Tilt Reverse

With this function you can reverse the Tilt-movement.

1. Tap <MODE/ESC> button

access the main menu

Tap the <Up/Down> button until

“Personality” is displayed. Press ENTER, the display will show “Personality”. Tap the
<Up/Down> button until the display will show “Status settings”. Press ENTER, the
display will show “Status settings”.

2. Press <Up/Down>, the display will show “Tilt Reverse”.
3. Press< ENTER>, the display will show “Tilt Reverse”.

Summary of Contents for GL2P







































Reviews:

No comments

Brands by name

Popular brands

Load more brands