manualshive.com logo in svg

Terbly GL2P, User Manual

Share
Download
Terbly GL2P User Manual Download Page 24

  GL2P  User  Manual                                                                                                                                XM1460-V1.0-NR

23

When set to Manual Mode, fixture will be back to factory settings. If want to adjust brightness,
can adjust by shutter and dimming channel, channel value is 0-255. Other functions can be set
according to user's real need.

1

Tap <MODE/ESC>button

access the main menu

Tap the <Up/Down>button until

“Effect Adjust” is displayed. Press ENTER, the display will show “Effect Adjust”.

2

Press <Up/Down>, the display will show “Manual control”.

3

Press< ENTER>, the display will show “Manual control”.

4

The display show “PAN=XXX”…….

5

Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

9.5.3. Calibration
With  this  function, you can  calibrate and adjust the  effect wheels  to their  correct  positions. The
password of calibrate values is 050.

1

Tap <MODE/ESC> button

access the main menu

Tap the <Up/Down> button until

“Effect Adjust” is displayed. Press ENTER, the display will show “Effect Adjust”.

2

Press <Up/Down>, the display will show “Calibration”.

3

Press< ENTER>, the display will show “Calibration”.

4

The display show “Password=XXXX”.

5

Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

9.6. USERS MODE SET

1

Tap <MODE/ESC> button, access the main menu, Tap the <Up/Down> button until
“Users mode set” is displayed. Press <ENTER>, the display will show “Users mode
set”.

2

The display shows “User Mode” , Press <Up/Down> button, then you can choose “Edit
User Mode A”, “Edit User Mode B” and “Edit User Mode C”.

3

Press <ENTER> to confirm or press <MODE/ESC> to exit

As well as Standard Mode, Basic Mode and Extended Mode, this fixture has another three
DMX modes which can be set according to user's needs. To set one of these user modes see
below:

1

Tap <MODE/ESC> button, access the main menu, Tap the <Up/Down> button until
“Users mode set” is displayed. Press <ENTER>, the display will show “Users mode
set”.

2

Choose “Edit User Mode A”, press “ENTER”

3

Set “Max Channel=xxx” the max channel

4

Set “Edit User Mode B”and “Edit User Mode C” as above

9.6.1. User Mode
With this function, you can create user defined channel orders.

9.6.2. Edit User Mode
With this function, you can adjust the rest user defined channel order.

1

Tap <MODE/ESC> button, access the main menu, Tap the <Up/Down> button until
“Users mode set” is displayed. Press <ENTER>, the display will show “Users mode
set”.

2

The  display  show  “Edit  User  Mode”  first  channel,  Press  <Up/Down>  the  display  will
show “Edit User Mode”.

Summary of Contents for GL2P







































Reviews:

No comments

Brands by name

Popular brands

Load more brands