Terasic VEEK-MT2 User Manual Download Page 4

Page: 4 / 58

VEEK-MT2 User Manual

www.terasic.com
July 4, 2016

Chapter 1

Introduction of the VEEK-MT2

The Video and Embedded Evaluation Kit - Multi-touch, Second Edition (VEEK-MT2) is a comprehensive

design environment with everything embedded developers need to create processing-based systems.

VEEK-MT2 delivers an integrated platform that includes hardware, design tools, intellectual property (IP) and

reference designs for developing embedded software and hardware platform in a wide range of applications.

The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific

application. The VEEK-MT2 features the DE2-115 development board targeting the Cyclone IV E FPGA, as

well as a capacitive LCD multimedia color touch panel which natively supports multi-touch gestures. An

8-megapixel digital image sensor, ambient light sensor, and 3-axis accelerometer make up the rich feature-set

The VEEK-MT2 is preconfigured with an FPGA hardware reference design including several ready-to-run

demonstration applications stored on the provided SD card. Software developers can use these reference

designs as their platform to quickly architect, develop and build complex embedded systems. By simply

scrolling through the demos of your choice on the LCD touch panel, you can evaluate numerous processor

system designs.

The all-in-one embedded solution offered on the VEEK-MT2, in combination of the LCD touch panel and

digital image module, provides embedded developers the ideal platform for multimedia applications with

unparallel processing performance. Developers can benefit from the use of FPGA-based embedded processing

system such as mitigating design risk and obsolescence, design reuse, reducing bill of material (BOM) costs

by integrating powerful graphics engines within the FPGA, and lower cost.

Figure 1-1

shows a photograph of VEEK-MT2.

Figure 1-1 The VEEK-MT2 board overview

Summary of Contents for VEEK-MT2



























































Search results

Summary of Contents for VEEK-MT2

Reviews:

Related manuals for VEEK-MT2

Brands by name

Popular brands

Terasic VEEK-MT2, User Manual

Search results

Summary of Contents for VEEK-MT2

Reviews:

Related manuals for VEEK-MT2

Brands by name

Popular brands